Transportation comparison: The top 5 bus companies for New York City to Washington, DC

In this article, we compare several options to travel from New York City to Washington, DC and back. We found that the bus is this most economic options for this route, especially for last-minute bookings. We compare and rank the best bus companies.

Other means of transportation
A flight from New York to DC takes about 1:30 hours. Including the additional time for check-in and security, the total time needed for the journey is similar to the train which takes about 3:30 hours. Both means of transportation are faster than the bus, but also more expensive. The train is roughly 2x more expensive than the bus. Going by plane is usually 4x the cost of the bus. However, when planned in advance, both traveling by train and by plane can be affordable.

Bus travel time
On days with less traffic, the commute by bus takes as little as 4 hours. On busier days it takes about 5 hours. On days with very heavy traffic e.g. Friday afternoon, the commute can take up to 6 hours, in some situations even more. The length of the commute also depends on how many stops the bus makes between the two cities. Some buses stop in both Philadelphia and Baltimore.

This is our bus ranking

1. BestBus
When booking last-minute, BestBus offers the best deal. The bus stops are at Midtown west (NYC), Union Station (DC), and Dupont Circle (DC).
+ New buses, and very good experience
+ Power outlets working
+ Fast: No stops in other cities, only 10min rest stop
+ Free water bottle
+ Wi-Fi slow, but available
+ Bus stops are located very conveniently
– Doesn’t operate during the nighttime

2. Flixbus
When booked far enough in advance, Flixbus offers the best deal because of their dynamic pricing model. Depending on what time of the day, the Flixbus stops in either Baltimore, Philadelphia, both, or goes non-stop.
+ Cheap when booked in advance
– Only a few power outlets functional

3. Megabus
Similar to BestBus, Megabus also offers good last-minute deals.
+ Power outlets working
+ 2 decks with moonroof
+ Operates during nighttime
– Usually stops in Philadelphia and Baltimore

4. Wanda Coach
Wanda Coach offers cheap last-minute deals even on very busy weekends, when other buses are sold out. However, the riding experience is not the best. The bus stops at a rest area and in Baltimore, but not in Philadelphia.
+ Power outlets available
+ Cheap last-minute option when other buses sold out
– Bus stops at incontinent places
– Driver doesn’t speak English

5. Peter Pan
Peter Pan offers an average experience for an average price. The bus usually stops in Baltimore.
+ Good travel experience
– Not all power outlets working

All in all, BestBus offers the best experience when booking a journey from New York City to Washington, DC or vice versa last-minute. BestBus shows that they really care about their customers by providing new buses and offering extra services such as free water bottles.

High Inflation: How Real Estate Investors Benefit Twofold

Real estate investors look quite relaxed at the increase in inflation. In fact, they even benefit from it. Twofold! Firstly, the value of property raises with inflation. Secondly, and even more important, the mortgage they have taken on becomes smaller and easier to pay back. In the US, the estimated annual inflation rate in February 2022 is at 7.9%. That is substantially higher than the target inflation rate of 2% and the nightmare of every cash and fixed-interest bond holder.

1. Real Estate Prices and Rent Increase

Property values and rent highly correlate with inflation. Historically, property values have always increased more than the annual inflation rate. This is because, if maintained properly, real estate provides the same value to tenens for decades. Therefore, rent can be also increased according to the inflation. The salary of prospective renters goes up during inflation. Thus, the landlords can increase the rent such that the same proportion of the tenant’s paycheck ends up in the landlord’s pocket.

2. The Mortgage Payment Becomes Less

Just to be clear: The total amount of the mortgage stays the same. Still, the morgage gets less effectively because money becomes worth less. This is true for mortgages with fixed interest rates. E.g., assume the landlord pays a monthly mortgage payment of $1,000 to the bank while earning $5,000. Now, assuming 10% inflation, the landlord’s income will increase to $5,500 a year. Yet, the mortgage payment will remain at $1,000. Hence, it becomes easier over time to pay the mortgage back. Outstanding credit becomes much less over time under high inflation.

Conclusion

Real estate investors are not afraid of high inflation. In fact, they even pray for it to come because they profit twofold. Property prices and rent do not only increase with inflation, most importantly, debt becomes smaller at the same time.

HOWTO run the LipSync Pro Montreal module in Unity without “Module failed compatibility check” or “MFA application failed. Check your audio encoding or enable conversion” errors

We assume that you already have some experience developing in Unity. You also need to have to LipSync Pro asset installed from the Unity store.

Tutorial

  1. LipSync Pro Setup:
    First, you need to import the Lipsync Pro package into your Unity project.
Import LipSync Pro into your Unity project.

Then, run the AutoSync Setup Wizard (Window -> Robot Digital) to setup the paths and download the Montreal Forced Aligner.

Run the LipSync Pro Setup Wizard.
Download the Montreal Forced Aligner Module.

2. Once LipSync Pro is set up, open the Clip Editor:

Window → Robo Digital → LipSync Pro → OpenClip Editor

Open the clip editor.

3. Transcript:

Create [wav-filename].txt with the transcript and save it in the same folder as your .wav file.

Create transcript .txt file.

4. Select .wav Audio Clip in the Clip Editor.

The .wav audio file and the .txt transcript need to be in the same folder in the Assets directory of your current project.

Select the .wav file in the Clip Editor.

5. Check transcript in Edit → Clip Settings

6. Run AutoSync:

Go to AutoSync → Open AutoSync Window
Select Default (English) Preset
Untick Use Audio Conversion
Click Start Single Process

Check your settings in the AutoSync Window.

Check the phonemes that were generated. Adjust them manually if needed.

Generated phonemes after running the Montreal Forced Aligner.

7. Save Output:
File -> Save As
Choose location for your asset file.

5 Steps to Watch Videos With Subtitles From a DLNA Media Server.

Not able to watch your favorite movie or series on you TV?

Avoid “File Format Not Supported” or “Error Reading File” errors when watching videos from your DLNA server by converting them to the appropriate format.

What’s the problem?

Most often videos can be decoded by VLC or other video players , but Smart TVs (Samsung, Sony, Panasonic,…) and similar devices are not able to stream them from the DLNA server. This is because those devices do only support specific file formats. Therefore, the video files need to be converted before they can be streamed.

Which software is the best?

XMedia Recode is a great tool which is capable of converting a wide variety of different audio and video codecs. It also supports subtitles conversion such that they can be switched on/off on your TV. Many other video converts lack this feature.

Step-by-Step Guide

  1. Download XMedia Recode
    On Windows, download and install XMedia Recode.
Download the XMedia Recode version compatible with your system.

  1. Run program and select profile
    Start the program and select a profile according to the device you want to watch the video on. If you want to support most devices, select the Matroska Multimedia Container (.mkv).
Select the Matroska format for maximum support.

  1. Select video files
    Next, choose the files you want to convert. Check the “Video” and the “Audio” tab. If the file is already in the correct format you might want to choose “Copy” instead of “Convert” to save conversion time and keep the original video quality. Most likely, either video or audio need to be converted to be readable by your device. If you want to copy subtiles, they must be selected in the subtitles tab.
If the input video track already is in the correct format, select the “Copy” mode. If the video track is in an unsupported format, select the “Convert” mode instead.
Convert the audio to the supported format “Fraunhofer FDK ACC”.
Copy subtitles such that they can be switched on /off in the output video.

  1. Add Jobs
    Finally, add each file you want to convert as a job by clicking “Add to queue” in the top menu. Check you Queue and start the conversion by clicking “Encode”. Once converted the old files can be removed.
Double-check you jobs queue and start convertion!

  1. Enjoy watching!

Which Google Chromecast To Choose?

One important aspect when choosing a casting device is power consumption. In this article we compare the Chromecast 3 (2018 Version) with the Chromecast Ultra.

Google Chromecast 3.

In our tests, we compare idle and active wattage. Chromecast 3 needs about 0.6 W (watts) in idle while Chromecast Ultra consumes 1.7 W. When watching YouTube videos in HD, the consumption increases slightly to 1.0 W for Chromecast 3 and 2.0 W for Chromecast Ultra. The numbers are shown in Table 1.

Google Chromecast 3Google Chromecast Ultra
Idle0.6 W1.7 W
YouTube HD1.0 W2.0 W
Table 1: Comparing the power consumption of Chromecast 3 and Chromecast Ultra.

Conclusion

If you own a 4K TV, we recommend buying Google Chromecast Ultra. With a FullHD TV, Google Chromecast 3 is the better choice because of lower energy consumption. Note that Chromecast 3 can also be connected to your LAN using the Ethernet adapter if needed.